Breakthrough opens door to $100 ultrasound machine

UBC breakthrough opens door to $100 ultrasound machine
UBC researcher Carlos Gerardo shows new ultrasound transducer Credit: Clare Kiernan, University of British Columbia

Engineers at the University of British Columbia have developed a new ultrasound transducer, or probe, that could dramatically lower the cost of ultrasound scanners to as little as $100. Their patent-pending innovation—no bigger than a Band-Aid—is portable, wearable and can be powered by a smartphone.

Conventional use piezoelectric crystals to create images of the inside of the body and send them to a to create sonograms. Researchers replaced the piezoelectric crystals with tiny vibrating drums made of polymer resin, called polyCMUTs (polymer capacitive micro-machined ultrasound transducers), which are cheaper to manufacture.

"Transducer drums have typically been made out of rigid silicon materials that require costly, environment-controlled manufacturing processes, and this has hampered their use in ultrasound," said study lead author Carlos Gerardo, a Ph.D. candidate in electrical and computer engineering at UBC. "By using polymer resin, we were able to produce polyCMUTs in fewer fabrication steps, using a minimum amount of equipment, resulting in significant cost savings."

Sonograms produced by the UBC device were as sharp as or even more detailed than traditional sonograms produced by piezoelectric transducers, said co-author Edmond Cretu, professor of electrical and computer engineering.

Engineers at the University of British Columbia have fabricated an ultrasound transducer no bigger than a Band-Aid. The device can pave the way for wearable ultrasound devices in the future. Credit: University of British Columbia

"Since our transducer needs just 10 volts to operate, it can be powered by a smartphone, making it suitable for use in remote or low-power locations," he added. "And unlike rigid probes, our has the potential to be built into a flexible material that can be wrapped around the body for easier scanning and more detailed views—without dramatically increasing costs."

Co-author Robert Rohling, also a professor of electrical and computer engineering, said the next step in the research is to develop a wide range of prototypes and eventually test their device in clinical applications.

"You could miniaturize these transducers and use them to look inside your arteries and veins. You could stick them on your chest and do live continuous monitoring of your heart in your daily life. It opens up so many different possibilities," said Rohling.

The research was published recently in Nature Microsystems & Nanoengineering.

More information: Carlos D. Gerardo et al, Fabrication and testing of polymer-based capacitive micromachined ultrasound transducers for medical imaging, Microsystems & Nanoengineering (2018). DOI: 10.1038/s41378-018-0022-5

Citation: Breakthrough opens door to $100 ultrasound machine (2018, September 11) retrieved 28 March 2024 from https://phys.org/news/2018-09-breakthrough-door-ultrasound-machine.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Flexible ultrasound patch could make it easier to inspect damage in odd-shaped structures

2601 shares

Feedback to editors